[RELEASE] WA3 Editor Tools Conversion Files (UPDATE DEC. 02)
- Blazeknight
- Rainbow Master
- Posts: 797
- Joined: Sun Nov 04, 2012 5:50 am
- LexieTheFox
- Rainbow Master
- Posts: 769
- Joined: Mon Sep 27, 2010 11:51 pm
What about the hub level the adventure star's in? If you try loading to that directly, instead of the adventure star's position, do things load properly?
EDIT: Okay, wait, that's a dumb question, it has to be loading that level properly if the adventure starts.
Two thoughts, then - First off, what exactly happens when the game crashes? Does it MAV the instant the adventure's over, does it load a bit then MAV, what happens?
Second off, do you have the PoTZ Adventure Player setup on your computer? It might help to look at the level causing trouble on its own there. If it doesn't work in the player in its own adventure, then it's likely something in the level itself.
EDIT: Okay, wait, that's a dumb question, it has to be loading that level properly if the adventure starts.
Two thoughts, then - First off, what exactly happens when the game crashes? Does it MAV the instant the adventure's over, does it load a bit then MAV, what happens?
Second off, do you have the PoTZ Adventure Player setup on your computer? It might help to look at the level causing trouble on its own there. If it doesn't work in the player in its own adventure, then it's likely something in the level itself.
Last edited by Qloof234 on Mon Nov 11, 2013 9:12 am, edited 1 time in total.
- LexieTheFox
- Rainbow Master
- Posts: 769
- Joined: Mon Sep 27, 2010 11:51 pm
Well, actually. The first time I tried you started ON the star's position so that it started immiediently. Like your PoTZ Editor does to kick to the custom adventure screen. (Except it does it twice)Qloof234 wrote:What about the hub level the adventure star's in? If you try loading to that directly, instead of the adventure star's position, do things load properly?
Just now, I tried it with a level where you spawn in a forest, with a path leading to a fort. A friend calls to you saying to come in, and runs in. When he does, it triggers the star to appear. Losing or aborting And So It Begins... is supposed to spawn you one tile BELOW the star. I can give you the level if you want. IT's it's own adventure so I can give it to you in a palyable format.
Rawr.
Fear me, I bite! >:3
Fear me, I bite! >:3
- LexieTheFox
- Rainbow Master
- Posts: 769
- Joined: Mon Sep 27, 2010 11:51 pm
Heres a picture.Qloof234 wrote:I think whatever's going on has something to do with the hub levels, as opposed to the adventure itself. Having said that, what do you have for the hub information in the master.dat file? That might have some relation, I'm not sure.
EDIT: Added picture of the coordinates of the winning variable in the editor.
You do not have the required permissions to view the files attached to this post.
Rawr.
Fear me, I bite! >:3
Fear me, I bite! >:3
- Blazeknight
- Rainbow Master
- Posts: 797
- Joined: Sun Nov 04, 2012 5:50 am
But in the editor, they seem like wa1 models stretched and contracted. But the MOFI trees look like real trees. Well are there wop's of flipbridges, crabs like how they "REALLY LOOK" in the player?LexieTheFox wrote:I may not be Qloof, but I can awnser your first question.Blazeknight wrote:Amazing... I have a little some queries...
1) Qloof you just made wops of potz to come on the editor in the same way they appear in thegame. In the same way can you make Mofi well wops like flip bridges, retro, crab wops?
2) can we move the discussion to The Ultimate Wa Editor Hex Editing Topic"? They fit well in there...
There are already mofi wops of all you just asked
Go to the MOFI Wops download Qloof gave me a few posts up. They're all in there.
What about Level 2? If you try running that as a standalone adventure in the PoTZ Player (assuming you have it set up), does it work, or still crash?LexieTheFox wrote:Heres a picture.Qloof234 wrote:I think whatever's going on has something to do with the hub levels, as opposed to the adventure itself. Having said that, what do you have for the hub information in the master.dat file? That might have some relation, I'm not sure.
EDIT: Added picture of the coordinates of the winning variable in the editor.
The only guesses I can come up with are either A) If the level's using PoTZ/MoFI elements, it didn't convert properly which is causing the game to crash, or B) The game's not picking up on the level for whatever reason.
For now, I'm tired, I'll take another look at this once I've gotten some sleep. I'll probably be able to think a lot more clearly then.
- LexieTheFox
- Rainbow Master
- Posts: 769
- Joined: Mon Sep 27, 2010 11:51 pm
EDIT: NEVERMIND! I did it! As it turns out, it apparently bugged out the coordinates for that time ONLY. They're normal after all! Woohoo!Qloof234 wrote:What about Level 2? If you try running that as a standalone adventure in the PoTZ Player (assuming you have it set up), does it work, or still crash?LexieTheFox wrote:Heres a picture.Qloof234 wrote:I think whatever's going on has something to do with the hub levels, as opposed to the adventure itself. Having said that, what do you have for the hub information in the master.dat file? That might have some relation, I'm not sure.
EDIT: Added picture of the coordinates of the winning variable in the editor.
The only guesses I can come up with are either A) If the level's using PoTZ/MoFI elements, it didn't convert properly which is causing the game to crash, or B) The game's not picking up on the level for whatever reason.
For now, I'm tired, I'll take another look at this once I've gotten some sleep. I'll probably be able to think a lot more clearly then.
Rawr.
Fear me, I bite! >:3
Fear me, I bite! >:3
- Blazeknight
- Rainbow Master
- Posts: 797
- Joined: Sun Nov 04, 2012 5:50 am
- Blazeknight
- Rainbow Master
- Posts: 797
- Joined: Sun Nov 04, 2012 5:50 am
- Blazeknight
- Rainbow Master
- Posts: 797
- Joined: Sun Nov 04, 2012 5:50 am
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
- Blazeknight
- Rainbow Master
- Posts: 797
- Joined: Sun Nov 04, 2012 5:50 am
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
- MyNameIsKooky
- Rainbow Spirit Master
- Posts: 9711
- Joined: Mon Dec 01, 2008 10:18 pm
I can confirm that the logic ID for the Brr floats is 2C 01 00 00 00 00 00 00 and the model is !IceFloat.
I managed to create something resembling the Brr floats for WA1E, but the game acts like they're not there. Except for when you place Brr floats in the same spot and slide across them, in which case both floats disappear. Things might've changed for Brr floats since WA1E so I don't know if the information in this paragraph still applies.
I managed to create something resembling the Brr floats for WA1E, but the game acts like they're not there. Except for when you place Brr floats in the same spot and slide across them, in which case both floats disappear. Things might've changed for Brr floats since WA1E so I don't know if the information in this paragraph still applies.
- StinkerSquad01
- Rainbow AllStar
- Posts: 4250
- Joined: Mon Aug 09, 2010 3:39 am
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
I found something on zap-bots!
ZAP-BOT settings
Data1=turn direction(default 0)
Data2=speed(default 1,0 never moves)
Data3=firing range(default 7,-1 never fires,0 fires after player touches the zap-bot)
Data4=follow path?(0 for no,1 for yes)
Data1 and data4 could be interchanged because I guessed them.
ZAP-BOT settings
Data1=turn direction(default 0)
Data2=speed(default 1,0 never moves)
Data3=firing range(default 7,-1 never fires,0 fires after player touches the zap-bot)
Data4=follow path?(0 for no,1 for yes)
Data1 and data4 could be interchanged because I guessed them.
I am getting outta here, nothing is new, everything is boring.
Speed - 999Krishiv738 wrote:I found something on zap-bots!
ZAP-BOT settings
Data1=turn direction(default 0)
Data2=speed(default 1,0 never moves)
Data3=firing range(default 7,-1 never fires,0 fires after player touches the zap-bot)
Data4=follow path?(0 for no,1 for yes)
Data1 and data4 could be interchanged because I guessed them.
Firing range - 999
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
The adventure would be impossible!dig 222 wrote:Speed - 999Krishiv738 wrote:I found something on zap-bots!
ZAP-BOT settings
Data1=turn direction(default 0)
Data2=speed(default 1,0 never moves)
Data3=firing range(default 7,-1 never fires,0 fires after player touches the zap-bot)
Data4=follow path?(0 for no,1 for yes)
Data1 and data4 could be interchanged because I guessed them.
Firing range - 999
I am getting outta here, nothing is new, everything is boring.
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
I found something to create scavenger zapbots and friendly zbots.
Scavenger(shoots laser when you are next to the zap-bot(like kabooms))
Data3=1
Friendly(zbot turns direction upon touching you as they are touching the wall)
Data4=1
Data3=-1
Scavenger(shoots laser when you are next to the zap-bot(like kabooms))
Data3=1
Friendly(zbot turns direction upon touching you as they are touching the wall)
Data4=1
Data3=-1
I am getting outta here, nothing is new, everything is boring.
Just noticed something about Conveyors/Star Trails - The Direction values are not the same as Transporters.
0 is up, and 2 is down. However, 1 is right and 3 is left, contrary to what the Editor shows.
Also, Data6 seems to behave as a "number of frames between movement". Lower values mean faster conveyors.
0 is up, and 2 is down. However, 1 is right and 3 is left, contrary to what the Editor shows.
Also, Data6 seems to behave as a "number of frames between movement". Lower values mean faster conveyors.
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
There is a lead in front facing south and trails beside the lead.there is no trail only lead when I test the adventure.How do I get that work,do I have to put one trail where I want create the end or the corner?Qloof234 wrote:I can confirm that they do actually work. How are they set up in your level?
I am getting outta here, nothing is new, everything is boring.
I'd think that'd work... When you say beside, do you mean horizontal to, or in the direction that the Lead is set to go in? Are they all the same Colour/SubColour?
EDIT: For that matter, do you have another Conveyor Lead object in the level that has the same Colour/SubColour data? If so, change that, it seems to make things act strangely.
EDIT: For that matter, do you have another Conveyor Lead object in the level that has the same Colour/SubColour data? If so, change that, it seems to make things act strangely.
- Krishiv738
- Rainbow Keeper
- Posts: 340
- Joined: Mon Jul 22, 2013 9:47 am
Colour is 0 sub colour is 0,I have also made vertical but they too don't work.Qloof234 wrote:I'd think that'd work... When you say beside, do you mean horizontal to, or in the direction that the Lead is set to go in? Are they all the same Colour/SubColour?
EDIT: For that matter, do you have another Conveyor Lead object in the level that has the same Colour/SubColour data? If so, change that, it seems to make things act strangely.
I am getting outta here, nothing is new, everything is boring.